Prime cold rolled coils with consistent gauge across the full length — the reliable feedstock for slitting lines, tube mills, roll forming and high-speed stamping.
MAK Steel supplies prime cold rolled steel coils (CR coils) in master and slit widths for processors, fabricators and manufacturers across Pakistan. Cold reduced from quality hot rolled coil, our CRC delivers a smooth surface, tight thickness control and uniform mechanical properties from the outer wrap to the core.
Consistent gauge along the full length is what makes a coil productive — it feeds cleanly through cut-to-length lines, slitters, tube mills and roll formers without constant re-setting, keeping scrap low and output high. That reliability is what our processing customers depend on.
Supplied to recognised international standards with defined grade, gauge, width and coil weight, our CR coils are ready to run — whether you are producing sheets, strips, tubes, profiles or coated products such as GI and PPGI.
What sets MAK Steel cr sheets apart on the production floor.
Thickness held tight across the entire coil so downstream lines run without repeated adjustment.
Sourced as first-grade, prime material for clean, defect-free processing — not re-rolled seconds.
Uniform cold rolled surface suited to visible parts, coating and painting.
Optimised for slitting, cut-to-length, tube milling, roll forming and stamping at speed.
An ideal substrate for galvanising (GI) and colour coating (PPGI) lines.
Master coils or slit-to-width strip supplied to match your line and part requirements.
Typical ranges supplied. Confirm exact availability for your order.
| Product | Cold Rolled Steel Coil (CRC / CRCA) |
| Thickness range | 0.15 mm – 3.0 mm |
| Width | Up to 1250 mm (1500 mm on request); slit-to-width available |
| Coil inner diameter | 508 mm / 610 mm |
| Coil weight | As required — light to full-weight master coils |
| Grades | CRCA, DC01, DC03, DC04, SPCC, SPCD |
| Standards | JIS G3141, EN 10130, ASTM A1008 |
| Surface finish | Matte / bright — oiled or dry |
| Temper | Full hard / annealed / skin-passed (as required) |
MAK Steel cr sheets serve a broad range of manufacturing and fabrication sectors across Pakistan.
Master coil slit to narrow strip and mults
Feedstock for CTL sheet production
Strip for ERW round and section tubing
Profiles, purlins, decking and sections
High-volume automotive and appliance parts
Base coil for zinc-coated sheet
Substrate for pre-painted coil
Any process needing reliable flat feedstock
